Yamaha Diversion 900

[Heyrul77]

Hi Buggers,

I just replaced my speedometer cable from A.M $13/-OEM part~ it's not easy to tighten/loosen the top where it link at the instrument panel need abit of finger muscle and a plier but anyhow did it without removing any other parts he,he,hee!

DIY save some money!!!

 

Silverghost...

 

Bro,

Isit due to wear and tear?

[Custom]

Bro,

Isit due to wear and tear?

 

Due to after GCE 'O' level too free nothing to do

[BlackAngel]

Hi guys, I just got a new feeling on my diversion yesterday. 8 pcs Clutch plates (together with gasket) , maxum4 15/50w engine oil, oil filter, NGK iridium plugs and H4 Philips 60/55W bulb replaced. Parts bought at AM and serviced at Shanfu (labour at $45).These are my birthday presents for my 2nd wife. Well,it's a good investment i guess. Great difference before and after.

 

Seems to me that the insurance premiums have gone up by a bit (I dunno about the rest but NTUC does)

 

Just something to share cos I always forgot the model no.

NGK Iridium Spark plugs model no. DPR8EIX-9

Denso Iridium Spark plugs model no. X24EPR-U9

[bats]

Hi guys, I just got a new feeling on my diversion yesterday. 8 pcs Clutch plates (together with gasket) , maxum4 15/50w engine oil, oil filter, NGK iridium plugs and H4 Philips 60/55W bulb replaced. Parts bought at AM and serviced at Shanfu (labour at $45).These are my birthday presents for my 2nd wife. Well,it's a good investment i guess. Great difference before and after.

 

Seems to me that the insurance premiums have gone up by a bit (I dunno about the rest but NTUC does)

 

Just something to share cos I always forgot the model no.

NGK Iridium Spark plugs model no. DPR8EIX-9

Denso Iridium Spark plugs model no. X24EPR-U9

 

Bro, how much total?

[BlackAngel]

Bro, how much total?

 

AM = $80

2nos. Oil Filter (1 spare to keep)

1 set of clutch plates consisting of 8 pcs

1 rubber gasket

 

Shop behind desker rd (dunnio what name) = $14x4=$56

4nos NGK iridium plugs

 

Motorworld = $30

H4 Philip Bulb Power2Night 50% brigher 60/55W (Lucky they sell 1 piece or else need to buy a pair which is double the price)

 

Shanfu = $22x4=$88 + $45(total labour)

Maxum4 Engine Oil 15/50W

 

Total $299

[cbkooky]

AM = $80

2nos. Oil Filter (1 spare to keep)

1 set of clutch plates consisting of 8 pcs

1 rubber gasket

 

Shop behind desker rd (dunnio what name) = $14x4=$56

4nos NGK iridium plugs

 

Motorworld = $30

H4 Philip Bulb Power2Night 50% brigher 60/55W (Lucky they sell 1 piece or else need to buy a pair which is double the price)

 

Shanfu = $22x4=$88 + $45(total labour)

Maxum4 Engine Oil 15/50W

 

Total $299

 

Not bad...$300 can replaced quite a number of things..

[mctan]

Hi everyone, long time no see.

Hope everyone is doing fine.

[Heyrul77]

Hi everyone, long time no see.

Hope everyone is doing fine.

 

Yeah! Me still around reading all the post..

[bats]

me around 2

[Euro]

alls good yeah bros!

[cheeko]

yo bats, custom, when wana go kulai whack nasi lemak or morning timsum?

[bats]

yo bats, custom, when wana go kulai whack nasi lemak or morning timsum?

 

Sorry bro, just came back from China.

[bats]

Guys, on the 21st of this month, there were be a Charity ride.

 

Biker Aid Charity Ride

Location : Kallang KFC

Date : 21 Jun 08

Time : 1500 hrs

Contact : Din 9768 9650

 

There will also be a meet up this coming Fri (13 Jun 08) at :

Location : Elias Rd (Spans Chalet) number B1

and there will be a photo shooting coming Monday by the media.

 

Can contact Din if u r in doubt.

[BlackAngel]

Errr,what is our part for the charity actually bro? Elaborate on the media thingy...

[bats]

Errr,what is our part for the charity actually bro? Elaborate on the media thingy...

 

Our part should be escorting with the Goldwing, heard that only Diversion n Goldwing doing escort, need to check with Din. And media is coming to photo shooting on the bike group on the chartiy event.

[BlackAngel]

 

Now this is what you mean,power is nothing without control. Superb.

[Swift]

Guys, on the 21st of this month, there were be a Charity ride.

 

Biker Aid Charity Ride

Location : Kallang KFC

Date : 21 Jun 08

Time : 1500 hrs

Contact : Din 9768 9650

 

There will also be a meet up this coming Fri (13 Jun 08) at :

Location : Elias Rd (Spans Chalet) number B1

and there will be a photo shooting coming Monday by the media.

 

Can contact Din if u r in doubt.

 

So this friday's meetup is for our Diversion group?

[Heyrul77]

Well, suddenly our thread came back to alive!

[Heyrul77]

Really long time no meet liao lei.. How's everybody?

[bats]

So this friday's meetup is for our Diversion group?

 

Yes, for Diversion.

[BlackAngel]

Bats

>Confirm the venue to meet (never been there before) and time for tomorrow

[SiLvErGhOsT]

Hi Buggers,

Lately my bike having some difficulty to start not as before- the first crank it fires up. The problem begins like when you start the bike it never starts but cranks like no fuel is reaching the carburettor after a couple of seconds later the rpm needle points to the number 9 and returns back, after turning my ignition off and on again and crank 2 or 3 times- then only the bike fires up. I brought my bike to the 'HL' met kenny and ask him whether he have come across this problem before on other bikes - at that moment he does not know as there is no number 9 code in the manual but he says there might be a electric surge or somewhere is been short out, so he has no clue for now, he ask me to either bring my bike back to check or leave it there for few days. I think- I bring it back and check it.

Well, I rode my bike back and started to check the wirings I modified and other gadgets which may link to this problem. "YES" I dicovered that the revtec is the problem its very hot and the wires are sticky - I discarded the revtec and fire up my bike symptom has gone and did not arise.

So those buggers using revtec do check the revtec time to time~ or after along use. This is a problem I'm sharing with you guys.

Another thing HL show room is selling those pit-stop type shirts with logos sewn on it is $40/- and the dry fit for $39/- I bought each.

So guys tonight what time is the meetup and where...buzz me he,he,heee!

 

Silverghost...

[SiLvErGhOsT]

Hi buggers,

Please check your rubber thingys (e.g. hoses, joints and mountings) after few years say (3 years and above) rubber looses their (sealing) property and started to crack under prolong heat, this is common to all bikes and vehicles...

 

Silverghost...:-)

[BlackAngel]

Thanx for sharing Silverghost. Very useful information.

[kevin]

Hi Buggers,

Lately my bike having some difficulty to start not as before- the first crank it fires up. The problem begins like when you start the bike it never starts but cranks like no fuel is reaching the carburettor after a couple of seconds later the rpm needle points to the number 9 and returns back, after turning my ignition off and on again and crank 2 or 3 times- then only the bike fires up. I brought my bike to the 'HL' met kenny and ask him whether he have come across this problem before on other bikes - at that moment he does not know as there is no number 9 code in the manual but he says there might be a electric surge or somewhere is been short out, so he has no clue for now, he ask me to either bring my bike back to check or leave it there for few days. I think- I bring it back and check it.

Well, I rode my bike back and started to check the wirings I modified and other gadgets which may link to this problem. "YES" I dicovered that the revtec is the problem its very hot and the wires are sticky - I discarded the revtec and fire up my bike symptom has gone and did not arise.

So those buggers using revtec do check the revtec time to time~ or after along use. This is a problem I'm sharing with you guys.

Another thing HL show room is selling those pit-stop type shirts with logos sewn on it is $40/- and the dry fit for $39/- I bought each.

So guys tonight what time is the meetup and where...buzz me he,he,heee!

 

Silverghost...

 

Thank you mate, i shall check my Revtec as well.

I just bought a 2-way alarm from Tommy in the mass order, yet to install.

 

warrn regards