Kawasaki KRR150 Riders

[fabianau]

i suggest just open stomach enuff power le. pipe too loud attract TP. maybe addon a fast throttle. haha...

[max hammad]

Owh... Thanks... Hehehe

[adesmond2]

hey hi frends, im looking for led lights to mount on my bike.. i came across some bikes

which i one my bike to have them too... care to help me?

 

These are the bikes lights..

[ATTACH=CONFIG]236913[/ATTACH][ATTACH=CONFIG]236914[/ATTACH]

 

I doubt very few people willing to help.. but we can guide.. which means we use mouth, u use your hands.. help means I need to hands on also..

 

hi guys, just wanna check if anyone has replaced their stock fork and/or rear suspension with aftermarket ones. do you notice an improvement in riding characteristics? do include how much you paid for and also at where. thanks alot!

 

I've seen before.. unsure on pricing and etc but i guess stock is still the best..

*unless u wan it to be broken fast enough..

 

Heya everyone.. Me just bought KRR last 2 weeks... Any tips to mod? Thanks and cheers!!!

 

haha.. mod.. depending on how big your pocket is.. if normal ones, use good spark plug/EO and change every 1.5~2 months u will see increase of HP at least +1~5..

 

i suggest just open stomach enuff power le. pipe too loud attract TP. maybe addon a fast throttle. haha...

 

good tips..

[max hammad]

Cool... Thanks guys

[mrchong]

ok thanks desmond for the reply!

[six_bucks]

Evening guys, just wondering where can I get different Jet size for pilot, main and air jet? And roughly how much? Does anyone knows?

[Raptor]

This Sunday, 4 Mar 2012.. SMSA BRS Round One at Pasir Gudang race track. Its a whole day affair.

 

Lots of KR150s will be racing.

 

And if you ever wondered how fast a KR can go.. here's a chance for you to see the fast bikes up close.

[adesmond2]

ok thanks desmond for the reply!

 

np..

 

Evening guys, just wondering where can I get different Jet size for pilot, main and air jet? And roughly how much? Does anyone knows?

 

Don't over play with your jets, it might lead to piston jam due to not enough fuel...

Jets can be purchase with most distributors.. Around ah boy there..

 

This Sunday, 4 Mar 2012.. SMSA BRS Round One at Pasir Gudang race track. Its a whole day affair.

 

Lots of KR150s will be racing.

 

And if you ever wondered how fast a KR can go.. here's a chance for you to see the fast bikes up close.

 

Sorry bro.. sounds good and temping but can't go due to operation soon.. sigh..

 

Update us on KRR results? hahaha...

[alvin8787]

np..

 

 

 

Don't over play with your jets, it might lead to piston jam due to not enough fuel...

Jets can be purchase with most distributors.. Around ah boy there..

 

 

 

Sorry bro.. sounds good and temping but can't go due to operation soon.. sigh..

 

Update us on KRR results? hahaha...

 

brother,take care!when n where?god bless u!

[Cerius]

Hi all! If coolant ran out it's ok to use water first right? Does using water instead of coolant run out faster? I top with water like gone very fast

[Cerius]

Sorry double post

[adesmond2]

brother,take care!when n where?god bless u!

 

SGH.. the week after next.. Spine Surgery.. 0.1% of paralysis..

hope everything is good after that..

 

Hi all! If coolant ran out it's ok to use water first right? Does using water instead of coolant run out faster? I top with water like gone very fast

 

it's ok but ensure there's still coolant.. 100% water will corrode your radiator with rust.. & u need to change a brand new radiator after that..

[SparkerS1]

I top with water like gone very fast

 

Another thing to add on, do not use tap water.

 

Best if u could change the coolant asap or add in more coolant (keep a spare bottle of coolant at home).

[Cerius]

thanks all for the reply. went to bike shop to clear the water alr~

Edited March 3, 2012 by Cerius

[ShoAsuka]

hi all, anyone interested to get pennzoil titanium 2T? Got some spares on hand letting go cheap @ $15/bot. RP:$18

[unsuitable90]

anyone interested in my FBA plated krr, bone stock. drop me a msg @9320 2882. thank you.

[Alpha]

To all KRR lao jiaos.

 

Got a question that most probably being asked by many people already, but this problem has been bugging me very long already.

 

So basically, My KRR has been fogging like hell, even after riding for like more than 5km already.

 

Even when stopping at traffic light time, during day time still not so bad. But night time, can see the exhaust is literally "vomitting smoke"

 

Symptom/State of the bike

 

According to the mechanics, my 2T intake already very low already... Then I'm using Castrol power1 2T (FD grade)

 

There are visible oil seen near the exhaust tip.

 

So according to the symptom, is it because my 2T is bad or other problems... Cause I asked 2 mechs already, both already say very low liao.. If close further, risk of piston jamming...

 

Please Advise.

[adesmond2]

To all KRR lao jiaos.

 

Got a question that most probably being asked by many people already, but this problem has been bugging me very long already.

 

So basically, My KRR has been fogging like hell, even after riding for like more than 5km already.

 

Even when stopping at traffic light time, during day time still not so bad. But night time, can see the exhaust is literally "vomitting smoke"

 

Symptom/State of the bike

 

According to the mechanics, my 2T intake already very low already... Then I'm using Castrol power1 2T (FD grade)

 

There are visible oil seen near the exhaust tip.

 

So according to the symptom, is it because my 2T is bad or other problems... Cause I asked 2 mechs already, both already say very low liao.. If close further, risk of piston jamming...

 

Please Advise.

 

Bring to ah chiong and let him see.. *it's free for checking..

ask him if what u can do to reduce the smoke.. ***Disclaimer*** he will joking ask u change your bike to 4 stroke den u say dun wan la.. just keep asking him.. For us,we can't advise until we dismantle your carb n check everything..

[tik]

hey hi frends, im looking for led lights to mount on my bike.. i came across some bikes

which i one my bike to have them too... care to help me?

 

These are the bikes lights..

[ATTACH=CONFIG]236913[/ATTACH][ATTACH=CONFIG]236914[/ATTACH]

 

 

thats my bike!

[Zakii]

Any one got rear break with master pump and side fairings to let go ?

[fabianau]

To all KRR lao jiaos.

 

Got a question that most probably being asked by many people already, but this problem has been bugging me very long already.

 

So basically, My KRR has been fogging like hell, even after riding for like more than 5km already.

 

Even when stopping at traffic light time, during day time still not so bad. But night time, can see the exhaust is literally "vomitting smoke"

 

Symptom/State of the bike

 

According to the mechanics, my 2T intake already very low already... Then I'm using Castrol power1 2T (FD grade)

 

There are visible oil seen near the exhaust tip.

 

So according to the symptom, is it because my 2T is bad or other problems... Cause I asked 2 mechs already, both already say very low liao.. If close further, risk of piston jamming...

 

Please Advise.

 

Happened to me before also. The 2T you using is ok, I used it before. Got 2 possibilities lo, one is maybe your pipe never decarbonised, second is like what happended to me, engine oil sip cause the seal spoil, therefore the while smoke you see is actually EO and cause excess white smoke.

[fabianau]

Any one got rear break with master pump and side fairings to let go ?

 

I got a spare front break caliper.

[Alpha]

Happened to me before also. The 2T you using is ok, I used it before. Got 2 possibilities lo, one is maybe your pipe never decarbonised, second is like what happended to me, engine oil sip cause the seal spoil, therefore the while smoke you see is actually EO and cause excess white smoke.

 

I think i heard one of the mech said before. May i know how much will it cost (agar) to solve this problem?

[.CandyZam.]

got spare block with piston perfect condition to let go. $180 with original gasket to go along.

[fabianau]

I think i heard one of the mech said before. May i know how much will it cost (agar) to solve this problem?

 

Decarbonised only can do in JB, singapore cannot do, cost around 50 - 60RM. As for oil seal damage quite exp as need overhual.